***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce TS58-20-40-0-V-24ER (5123091V) is a high-accuracy, heavy-duty pressure sensor designed for demanding industrial and off-highway equipment applications. It achieves a 1% total error band accuracy by integrating advanced ASIC technology with a stable, field-proven polysilicon, thin-film pressure sensor. The sensor operates effectively within a temperature range of -20 to 85\u00b0C (-4 to 185\u00b0F) and features reverse polarity and miswire protection. Its robust construction includes an all-welded pressure design with high EMI/RFI ratings and an IP67 ingress protection rating, ensuring reliable performance in challenging environments. This product also functions as a direct-acting, poppet-type, proportional pressure-relieving valve. The regulated pressure is directly proportional to the input electrical current, allowing precise control over fluid flow from port 1 to port 2. It supports both 12 and 24 volt coils with optional waterproof E-Coils rated up to IP69K. The valve has a maximum pressure factory adjustable between 275.8 to 344.7 bar (4000 to 5000 psi) in increments of 6.9 bar (100 psi). It can handle proof pressures up to 448.2 bar (6500 psi) at port 1 and burst pressures up to 944.6 bar (13700 psi). The TS58-20 series offers a flow rating of up to 6.8 lpm (1.8 gpm), with minimal internal leakage not exceeding 4.5 ml/min at 80% of the maximum setting. It exhibits low hysteresis at a maximum of 3.5% under specific conditions, ensuring consistent performance across varied operational demands. This versatile sensor is compatible with mineral-based or synthetic fluids with lubricating properties within a viscosity range of 7.4 to 420 cSt and can withstand operating contamination levels up to ISO code18/16/13 per ISO4406 standards, making it suitable for various hydraulic systems requiring precise pressure control and reliability under extreme conditions.