BALL NUT FEM-E-B 50X10RX6-6

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Bosch Rexroth directly.***
The Bosch Rexroth FEM-E-B 50X10RX6-6 (R150254084) is a precision-engineered ball screw assembly nut renowned for its robustness and high-performance capabilities. This single nut with flange FEMEB is designed with a nominal diameter of 50 mm, a lead of 10 mm, and right-handed threads. It incorporates a ball diameter of 6 mm within its design and features multiple ball track turns to ensure efficient and smooth motion transfer. With mounting dimensions adhering to DIN standards, specifically part flange type B, this component is equipped with standard seals and comes with standard axial clearance. The FEM-E-B 50X10RX6-6 offers various preload classes including C0, C1, C2, C3, and C5 to accommodate different application requirements and to maintain the rigidity of the assembly under varying loads. Its tolerance grade is T3, which applies to certain sizes as detailed in the product overview for corresponding screws. Constructed for durability, the nut can withstand operating temperatures ranging from -10°C to +100°C while maintaining dynamic load capacities that are valid for tolerance grades T3 and T5 only; correction factors must be considered for other grades. The maximum permissible linear speed (vmax) for this model is specified in its technical documentation. The FEM-E-B series falls under the category B of Bosch Rexroth's product offerings. With a static load rating that ensures stability under static conditions and an impressive dynamic load capacity, this ball screw assembly nut is optimized for high-load applications where precise linear motion is crucial. In terms of physical dimensions, the size Dg signifies the flange diameter while size L indicates the nut length; these measurements come with specific tolerances in millimeters. Additionally, it has been designed to operate effectively at continuous temperatures up to 80°C with temporary peaks up to 100°C when measured on the outer shell of the nut. This model boasts an exceptional balance between performance and reliability without compromising on precision—a testament to Bosch Rexroth's commitment to quality in motion control solutions.