***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce SV10-21P-0-N-00 (5029015) is a solenoid-operated, 2-way, piloted, poppet-type hydraulic cartridge valve that is normally open and designed for low leakage in load-holding applications. This valve allows flow from port 2 to port 1 when de-energized and restricts flow from port 1 to port 2. Upon energization, the valve's poppet closes against its seat, blocking flow from port 2 to port 1 while permitting flow in the reverse direction after overcoming a solenoid force of 50 to 150 psi (3.4 to 10.3 bar). It features a continuous-duty rated coil and a hardened seat for durability and minimal leakage. Additionally, the SV10-21P-0-N-00 offers optional coil voltages and terminations, efficient wet-armature construction, voltage interchangeable cartridges, and a unitized molded coil design. A manual override option enhances usability in various operational settings. For environments requiring robust performance, optional waterproof E-Coils are available that are rated up to IP69K. The valve operates effectively within a fluid temperature range of -40°C to +100°C with Buna N seals and can handle pressures up to 207 bar (3000 psi), with proof pressure at 344 bar (5000 psi) and burst pressure reaching up to 779 bar (11300 psi). It supports maximum flow rates up to 102 lpm (27 gpm) based on conditions set at 34.4 bar (500 psi). The unit's weight is approximately 0.16 kg for the cartridge alone or about 0.46 kg when equipped with an E-coil. This product is versatile with no orientation restrictions in installation, ensuring ease of use across various applications without specific setup constraints.