***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce CV10-20-8T-N-100 (5201670) is a screw-in, cartridge-style hydraulic check valve designed primarily as a blocking or load-holding device. This model facilitates flow from port 1 to port 2 while typically blocking the flow in the opposite direction. It features a fully guided check assembly which remains spring-biased in a closed position until sufficient pressure at port 1 compels it to open towards port 2. The valve's seat is hardened, enhancing its durability and minimizing leakage, making it an ideal choice for applications requiring robust performance and reliability. The CV10-20-8T-N-100 can handle a maximum operating pressure of 3500 psi and a proof pressure up to 5075 psi. It supports a maximum flow rate of 20 gallons per minute with minimal internal leakage. Various seal options are available, including buna N, fluorocarbon, polyurethane, and HNBR seals, which allow the valve to operate effectively across diverse temperature ranges from as low as -40°C (-40°F) up to 204°C (400°F), depending on the seal material used. This model is also equipped with optional bias springs that provide flexibility for backpressure applications, with configurations available for different spring pressures including a 300 psi option. The CV10-20-8T-N-100 fits into industry-standard VC102 cavities and does not have any specific orientation restrictions during installation, providing ease of use and versatility in various hydraulic systems setups. Its robust construction includes corrosion protection that meets the Gcv1020 standard with a salt spray resistance per ASTM B117, ensuring long-term resilience against harsh conditions.